24 Volt Floor Scrubber Battery Watering System
This 24 Volt Floor Scrubber Battery Watering System is specifically designed for use with most 6 volt deep cycle batteries. This specific battery watering system includes 12x – VB-TBU valves, end caps, T-connectors and ample tubing to connect all the batteries in your application to allow for a one point watering system. This kit is great for the smaller floor care machines running 4x 6 volt 225Ah golf cart style batteries in a series to generate reserve power. If your scrubber has 4x 335Ah batteries (L16s) you will need a different kit as the valves for the batteries are different. See below or click here…
Any Battery Watering system is designed to give you a system that allows for quick and easy maintenance of your Lead acid battery bank. It is accomplished by replacing the battery’s existing vent caps with valves that are interconnected with tubing, allowing the user to fill all cells of the battery bank from a single point. Quick connect connectors – Snap on/snap off water connections turn the timely task of watering batteries into a quick, simple task taking seconds or minutes not hours! Each valve independently shuts off water flow to the cell when the proper electrolyte level is reached, allowing the batteries to be filled perfectly every time without having to look at the batteries.
Learn a little about the all New VB-TBU Valves which are incorporated in all our battery watering systems for 6 VOLT, 8 VOLT AND SOME 12 VOLT LEAD ACID BATTERIES…
The tubing barbs eliminate the need for clamps, and they are angled to make installation easy in tight configurations.
The z-Lock feature integrates the tee piece with the valve for added strength.
Quick Look Indicator
This unique indicator eye is visible from the top and side. It confirms proper operation of the valve.
Low Profile Design
The unique valve design reduces the risk of damage from battery cables.
If you do not think this is the specific valve or system designed for your application give us a call… We can custom make almost any battery watering system configuration you need! The BatteryPete Team is here to help you. Call (772) 444-2280
Installation is fast and easy: Gently push the valve into the vent well to install. No twisting is necessary to lock the valve in place.
Solid One Piece Float
Acid, temperature and impact resistant float is solidly constructed and cannot absorb water.
The spark arrestor prevents flames or sparks from entering through the battery vent opening.