The New 4000W Inverter Charger by Magnum Energy
The Magnum Energy MSH4024M 4000W Inverter Charger is a pure sine wave inverter designed with true hybrid technology allowing it to run larger loads from smaller generators. Combined with a PFC (Power Factor Corrected Charger) integrated into every inverter magnum manufactures make it a cut above the rest. The PFC technology allows it to use less energy from a generator than traditional chargers. Aprox. 30% less AC current than a standard charger. Installing the Magnum Energy MSH4024M 4000W Inverter Charger is a breeze as well. Four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.
Features and Benefits:
Hybrid technology: Most inverters only use one source of energy to power loads, either from incoming AC power – shore or AC generator – or from the batteries. The MSH-M Series combines the energy from both sources to power loads. This allows the inverter to recharge the batteries when there is surplus power or deliver more power to the loads if they require more than the AC input can supply by itself.
Load support: Load support parallels the inverter output with incoming AC sources allowing it to run larger loads from smaller generators.
This Magnum Energy MSH4024M 4000W Inverter Charger will power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provides clean, reliable inverted power with low total harmonic distortion (THD) of less than 5%. All MS Series Inverter chargers come in 12 and 24 volt configurations, allowing you to choose the model that is right for you. The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port. easy access on/off switches with LED indicators. The MSH-M is interchangeable with the Magnum MSH Series and uses the same accessories as the MS Series. The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be. Lightweight aluminum construction provides corrosion resistance while its unique design allow it to be mounted in any position.