ProMariner ProSport 6 Gen3 12V 6Amp On-Board 1 Bank Battery Charger
The ProSport 6 battery charger is perfect for flooded, gel and AGM 12 volt battery banks in marine applications. Its Distributed-On-Demand™ technology allows for faster charging.
ProSport Generation 3 On-Board Marine Battery Chargers incorporate all-digital microprocessor control. Like no other, the new ProSport Series provides automatic installation feedback with its exclusive “System Check OK” and individual “Battery Bank Trouble” LED indicators, and also has the most advanced energy saving mode. After fully charging and conditioning batteries, ProSport’s Energy Saver Mode will monitor and Auto Maintain batteries only when needed to maintain a full state of charge, resulting in maximum reserve power performance and lower AC power consumption and operating costs.
ProSport incorporates Distributed-On-Demand™ Charging technology, taking 100% of the available charging amps and distributing them to any one or combination of all batteries as needed for faster charging. ProSport is 100% waterproof and shockproof, weighing 40% lighter than older technology epoxy filled chargers providing cooler operation and greater reliability. Each ProSport model has 4 digitally selectable charge profiles including a once-a-month storage reconditioning mode for extending battery life.
Heavy-Duty Recreational Series On-Board Marine Battery Charger
– ProMar Digital Technology
Microprocessor and software controlled pulse charging technology delivering a 40% lighter design than the previous generation of epoxy filled chargers, cooler charger operation and faster charging.
– System OK and Battery Bank Trouble Status Indicators
Advanced technology eliminates time consuming troubleshooting by clearly indicating system and battery connections are OK or if a fault is present on a specific battery bank.
– Digital Multi-Stage Performance Charging
Fully charge and extend the life of your batteries. Automatically charges, conditions and safely maintains all batteries on board for maximum time on the water.
– Energy Saver Mode
After fully charging and conditioning batteries, ProSport’s Energy Saver Mode will monitor and Auto Maintain batteries only when needed, maintaining a full state of charge. This significantly reduces AC power consumption, lowers operating costs and maximizes reserve power performance.
– Storage Recondition Mode
During short or long-term storage, ProSport automatically reconditions all batteries on board once a month for maximum battery life and performance
– Distributed-On-Demand™ Technology
Automatically charges and maintains your engine crank battery while distributing all remaining charging amps to trolling motor or house battery(s).
– Digital LED Display and Battery Type Selector
LED indicators for Charging, Conditioning and Auto Maintain modes in addition to AC power and selected battery type (2 charge profiles to choose from with a 3rd high performance AGM HP profile on the ProSport20 Dual only).
– Built-in Quality & Safety
Compact and rugged extruded aluminum design, dual in-line DC safety fuses for trolling motor and house battery banks. Built-in over-voltage, overload, over-temperature,reverse polarity and ignition protection.
– Pre-wired for Easy Installation
ProSport Gen 3 Series
|model||part no.||DC voltage systems||amps||banks||cable length||size||weight||AC in|
|ProSport 6 Gen 3||43006||12||6||1||6’||7.125”x 7.25” x 2.75”||2 lbs||90-135|
|ProSport 8 Gen 3||43008||12/24||8||2||6’/6’||8.375”x 7.25” x 2.75”||3 lbs||90-135|
|ProSport 12 Gen 3||43012||12/24||12||2||6’/6’||9.875”x 7.25” x 2.75”||4 lbs||90-135|
|ProSport 15 (OEM only)||43015||12/24/36||15||3||6’/6’/6’||10.825”x 7.25” x 2.75”||6 lbs||90-135|
|ProSport 20 Gen 3||43020||12/24||20||2||5’/5’||12.125″x7.25″x2.75″||5 lbs||90-135|
|ProSport 20 Plus Gen 3||43021||12/24/36||20||3||6’/6’/6’||12.125”x 7.25” x 2.75”||6 lbs||90-135|