The Universal Flow-Rite Pro-Fill Battery Watering System
This Flow-Rite Pro-Fill Battery Watering system is designed to give you the parts you need to make your own battery watering system for any application. Boats, Golf Cart, RV, Solar System, Yacht, no matter the vehicle or vessel BatteryPete has you covered. If you are looking for a pro fill watering system for your golf cart we will need to know your specific golf cart manufacture, Year, Make, Model and the battery configuration. As well as what type of batteries are currently in your golf cart. If it is any other we will basically need to know how many batteries you have in the system, the brand of battery and the voltage (6v, 8v, 12v) . It really is that simple – your kit will include everything you need to make the pro fill watering system for your battery bank. The only thing that is required during installation is the tubing connecting each cell will need to be cut to fit. (Our tubing is very durable, resistant to all things related but very easy to cut with a razor, sharp knife, scissors or cutter type pliers. (Example – Specifically like Trojan Batteries T-875 Trojan Battery. ( Cell Spacing is what is most important) In this image it is for illustation purposes only. You can refer to our Blog Post for installation instructions and when your system is delivered you will receive a easy to use installation guide.)
Save Time and Money with a Universal Onboard Pro Fill Watering System
The Pro-Fill On-Board Battery Watering System is specifically designed for use with golf carts. Though the Battery Watering system is not limited to just golf carts. Any golf cart style battery ( Traditional Lead Acid Batteries) also found in boats and RVs, Solar systems, electric floor sweepers and floor scrubbers and even pallet jacks. Based on the same technology as our industrial Millennium Plus+ valves, our Pro-Fill system is compatible with all of our Millennium water supplies. The Pro-Fill on-board battery watering system works by replacing the battery’s existing vent caps with valves that are interconnected with tubing, allowing the user to fill all cells of the battery from a single remote location. Snap on/snap off water connections turn the often ignored task of watering batteries into a quick, simple task taking 30 seconds or less! Each valve independently shuts off water flow to the cell when the proper electrolyte level is reached, allowing the batteries to be filled perfectly every time without having to look at the batteries.
After installing your system you will realize other cost benefits including extended battery life; increased performance. Being able to fill your batteries without removing the cell caps will allow you to avoid things like battery acid burns, ruined clothing, and breathing noxious fumes. You can finally relax and rest assured with properly watered batteries the battery lasts longer and performs better. The average person does not even know they need to check or fill there golf cart batteries with water til it is to late and they need to buy new batteries. Once they do know they still don’t really know how to do it or how much water should be added and when to do it. You can learn more about proper battery maintenance here. One of the biggest problems is overfilling a battery. This results in loss of acid or technically speaking changes the specific gravity of the electrolyte(acid) in the battery and once this occurs you can damage the battery plates when charging. either way it equals loss of capacity and life expectancy.
If you do not see the specific pre-cut pre assembled kit for your specific golf cart here give us a call. The BatteryPete Team is here to help you. Call (772) 444-2280 to double check stock and availability.
You may need to use a universal kit that is designed to give you the parts you need to make the battery watering system, but the tubing connecting the battery cells will need to be cut to fit. Checkout some of your options here.