Lester Summit II Series Battery Chargers Bluetooth Wireless App Diagnostics

Lester Summit II Series Battery Charger-Bluetooth Wireless App-Diagnostics

Getting to know your new Lester Summit II Series Battery Chargers Bluetooth Wireless App will let you keep tabs on charge status and give you the power to make adjustments at your finger tips. This battery charger is simply incredible! No need to climb down into the hatch of your Duffy boat to check things out or take apart the dash, front or rear cowl of your golf cart. Just connect via Bluetooth on any Apple or Android wireless device and you are in! Let’s learn more….

Diagnostics

Ammeter – Displays the DC output current in amps and graphically Voltmeter – Displays the battery pack voltage in volts and graphically State of Charge (SOC) – Displays an estimate battery pack State of Charge (SOC) as a percentage Min Remaining – Displays the estimate charge time remaining in minutes Phase – Displays the active charge cycle phase Amp-Hours Charged – Displays the number of amp-hours charged Fault – Displays any active faults. See user’s manual for descriptions of the faults, as well as instructions for resolving them AC Volts – Displays the AC input voltage in volts Battery Temperature – Connect a battery temperature sensor to see the battery temperature in °C. Otherwise, charger will display “Not Detected” in this field.

History

Charger Histories Tab Overview Section

o Charger

Total Charge Cycles – Total charge cycles that the connected charger has recorded Total Amp-Hours – Total amp-hours that the connected charger has recorded

o Device

Total Charge Cycles – Total charge cycle history reports the number of downloaded cycles from the charger Last Charge Cycle – Number of the last charge cycle history record from the connected charger to your smart phone or tablet (device)

o Cloud

Total Charge Cycles – Total charge cycle history records that have been downloaded from the connected charger and uploaded to the ChargerConnect Cloud Last Charge Cycle – Number of the last charge cycle history record that has been downloaded from the connected charger and uploaded to the ChargerConnect Cloud Get 10 Records Button – Tap to download the latest 10 charge cycle history records that have not been previously downloaded from the connected charger to your smart phone or tablet (device) Get All Records Button – Tap to download all charge cycle history records that have not been previously downloaded from the connected charger to your smart phone or tablet (device) Delete All Records Button – Tap to delete all charge cycle history records from your smart phone or tablet (device) that have been previously downloaded from the connected charger Records Section – Individual charge cycle history records from the connected charger are displayed in this section (see “History Details” below) History Details The “History Details” screen displays the data for an individual charge cycle history record. When you have finished reviewing the data, depending on the screen size of the smart phone or tablet (device) that you are using, you may need to scroll down to access the “Go Back” button in order to return to the “Charger Histories” tab Cloud Histories Tab Tapping the “Start” button will upload all of the charge cycle history records from the connected charger to your smart phone or tablet (device) to the ChargerConnect Cloud. You can then access them from any smart phone, tablet, laptop, or PC via ChargerConnect.com using the charger serial number.

System Information

The “System Information” screen is for the display of information only. No editing of this screen is possible. Serial Number – Displays the serial number of the connected charger Model Number – Displays the model number of the connected charger Charge Control Version – Displays the version of charge control firmware on the connected charger Power Control Version – Displays the version of power control firmware on the connected charger Hardware Version – Displays the hardware version of the connected charger Vehicle ID – Displays the ID of the paired vehicle (if applicable). The Vehicle ID comes blank from the factory. You can set/modify the Vehicle ID the “Dashboard” and “System Profile” screens. Battery Information – For future use. Not currently active.

Offline Mode

If you have previously downloaded charge cycle history records from a charger to your smart phone or tablet (device), these records can be accessed when you are not connected to the charger by using Offline Mode. Offline Mode is available by tapping the “Offline” button on the “Connect” screen. Once you enter Offline mode, you can select the desired charger serial number from the list of all charger serial numbers that have charge cycle history records stored locally on your device. After selecting a charger serial number, you will have the option to view the charge cycle history records that are stored locally on your device for this charger serial number and upload these records to the ChargerConnect Cloud (see the “History” section for additional details). A common use for Offline Mode is when you download charge cycle history records from chargers in a location where your device does not have Internet access. You can use Offline Mode to upload these charge cycle history records to the ChargerConnect Cloud at a later time when your device does have Internet access. Learn More and Get the App Battery Profiles/Algorithms Buy Your New Summit II Series Charger Now If you think this article about the Lester Summit II Series Battery Charger is useful please let us know. If you would like to leave a message or have a question, email Battery Pete. A Battery Pete team member will respond ASAP. You can also call us at (772) 444-2280